PSR
SDDP Platform
SDDP Platform · Short-term dispatch

NCP

Sub-hourly dispatch on the SDDP Platform

NCP is PSR's short-term dispatch model, in production at system operators and utilities for more than 20 years. In SDDP 19 it is part of the SDDP Platform: it reads the same database as SDDP, receives the SDDP policy directly and runs with time steps down to 1 minute.

01Operation

What happens inside the hour

Renewables, batteries and faster changes in demand have moved part of the operation inside the hour, where every minute of dispatch is a cost or a saving. An hourly schedule averages these changes out.

  • Renewable ramps. A 600 MW drop in solar output within 15 minutes is no longer unusual, and the dispatch has to follow it at the time step of the operation.
  • Reserve activation. Primary response acts within seconds and secondary response within minutes, so the dispatch has to hold the right reserves at every interval.
  • Storage cycling. Batteries earn their value from arbitrage within the hour, between energy and ancillary services. An hourly schedule does not price it.

NCP captures this value by running the short-term dispatch at the resolution each decision requires, with the same system representation used by SDDP.

0 400 800 1,200 0 15 30 45 60 min Solar output (MW) 5-minute steps Hourly average 600 MW in 15 minutes
Illustration: a 600 MW drop in solar output within 15 minutes. At hourly resolution, the dispatch sees only the average.
02Platform

SDDP and NCP on one platform

SDDP computes the stochastic operating policy over months and years. NCP turns it into short-term decisions, with the same system representation. The integration is methodological, not only shared data.

Shared data

Generators, network, contracts and water values are defined once, for both models.

Coordinated

The SDDP policy feeds the NCP schedule through the future cost function.

Consistent

The same costs and constraints apply from years ahead to minutes ahead.

One source of truth

Planning and operation teams work on the same database.

03Resolution

The time step each decision needs

The time step is a setting of the study, not a different model. The same engine, database and data serve each use.

Hourly

Week-ahead and day-ahead planning: weekly unit commitment, long-horizon thermal scheduling and hydro targets checked against SDDP.

15 minutes

Day-ahead and intra-day operation: dispatch and reserves, intra-day trading, ramp-aware commitment, hybrid plants and storage cycling.

5 minutes

Real-time redispatch and ancillary services: redispatch after forecast deviations, reserve activation and frequency response.

1 minute New

The finest time step available in NCP, for the fastest ramps and balancing studies.

One input file for every resolution. Point NCP to one CSV file, in the resolution you already have, and the data is converted to the time step of each study. Dates can be absolute, sparse, periodic or defined by patterns.

See the file format
04Release

What's new in NCP

Besides joining the platform, NCP brings 1-minute time steps, a new time series input and modeling capabilities from SDDP.

Part of the SDDP Platform

NCP reads the SDDP database: water values, demand, network and contracts are used without re-modeling, from years to minutes.

Time steps down to 1 minute

Run the same case at 60, 30, 15, 5 or 1 minute, from the same input data.

Flexible time series input

One CSV file in any resolution, with absolute, sparse, periodic or pattern-based dates. Data is converted to the time step of each study.

Capabilities NCP now inherits from SDDP
  • Cross-border interchange: multi-country dispatch with import and export flows
  • Fuel contracts: take-or-pay, supply limits and transport tariffs
  • CSP plants with thermal storage
  • Commodity supply chains for natural gas or any other commodity, with network and storage
  • Fuel reservoirs, with refill and depletion
  • Reserve sharing across areas, with import and export limits
  • Flexible demand that responds to prices and reserves
  • Water desalination, coupled with the energy operation
05Modeling

Operational detail in every domain

SDDP sets the policy; NCP operates each asset with the detail short-term decisions need. Some examples of what NCP represents:

Hydro

SDDP sets the water values; NCP operates each turbine and cascade around them.

  • Hill curves: unit power as a function of net head and turbined flow
  • Head losses and plant arrangements (in-line, parallel and cascaded units)
  • Synchronous condenser mode, providing reactive power and inertia
  • Target generation, storage and turbined water, linked to SDDP through the future cost function
  • Forbidden zones and cavitation limits

Thermal

SDDP commits the fleet; NCP runs each unit with the precision every start-up needs.

  • Non-linear fuel consumption, as a table or a polynomial
  • Combined cycle coupling, with coupling costs and minimum times
  • Cogeneration plants that also supply steam
  • Start-up times that depend on the thermal state: cold, warm or hot
  • Forbidden generation ranges

Renewables and storage

Variability becomes flexibility at the time scale where storage earns its value.

  • Hybrid plants: solar or wind with storage, dispatched as one asset
  • Storage that chooses between energy and reserves at every interval
  • Asymmetric reserves, with different up and down capacities
  • Precedence for curtailing wind, solar and run-of-river plants
  • Energy and reserve bids for renewables and storage

Reserves and ancillary services

SDDP allocates the reserves; NCP delivers the services.

  • Primary, secondary and tertiary reserves, with explicit response times
  • Inertia as an instantaneous service, co-optimized with energy and reserves
  • Reserve capability as a share of the current generation
  • Up and down regulation assigned separately for each unit
  • Separate price and quantity offers for each reserve product
SDDP 19 · NCP

NCP is part of SDDP 19

Install SDDP 19 to run NCP, or talk to our team about your case.